Caliper Practice Block Lesson
Here Is What You Need To Know!
This Lesson will be used as a performance assessment.
One block per student or pair of students.
One Caliper per student.
One block per student or pair of students.
One Caliper per student.
This block is a tool I use in my middle school classroom. We use it to practice Vernier caliper skills after the students have learned how to use them with other objects. You can use it as a performance assessment--you can print blocks that are scaled differently to make it impossible to copy at the same table.
It allows the use of all of the tools on the caliper--depth of hole, outside and inside diameters, step height as well as the lenth, width and depth of the block.
The prints you see are printed with a SimpleBot Simple Metal. I used a very low infill and low shell depth to increase the speed of printing. They are low quality, as you can see, students are to measure and draw replica with measurements.
It allows the use of all of the tools on the caliper--depth of hole, outside and inside diameters, step height as well as the lenth, width and depth of the block.
The prints you see are printed with a SimpleBot Simple Metal. I used a very low infill and low shell depth to increase the speed of printing. They are low quality, as you can see, students are to measure and draw replica with measurements.
Teacher Download |
| ||
